Products Catalog

CON-SERV Inc offers (3) basic pot bearing types: fixed, guided, and free-moving. In order to give the engineer typical dimensional data, the following criteria was adopted by CON-SERV Inc. as standard for the bearing detailed.
CON-SERV offers other types of designs; consult Engineering Department personnel for design assistance. CON-SERV can supply full friction and proof-load testing on all pot & disc bearing designs.

Standard Design Criteria:
  • Steel Type – A588 (Y.P. = 50 KSI)
  • Rotation Capacity - .02 radians
  • Maximum Pressure on Elastomer – 3500 psi for pots to 5000 psi for discs
  • Coefficient of friction - .03
  • Lateral Load Capacity – 10% of Vertical (unless noted otherwise) Load (Fixed and Guided) – Maximum for Standard Design
  • Movement ± 1” – Maximum for Standard Design


Unit of Measure

Type

N/A Fixed

Steel Type

N/A A588 (Y.P. 50 KSI)

Rotation Capacity (radians)

N/A 0.02

Maximum Pressure on Elastomer (psi)

N/A 3500

Coefficient of Friction

N/A 0.03

Lateral Load Capacity

N/A 10% of Vertical Load

Movement (in.)

N/A ± 1

Vertical Load (K)

N/A 300

I.D. Pot (in.)

N/A 10.50

A (in.)

N/A 12.00

B (in.)

N/A 0.75

C (in.)

N/A 1.94

D (in.)

N/A 3.50

Weight (lbs.)

N/A 148

N/A For a complete guide specification, please consult engineering department. All Pot Bearings can be designed and fabricated to meet the current AASHTO Code requirements.

N/A The bearings indicated may be welded into the structure or, if required, a leveling plate may be added with anchor bolts and grout for concrete installation.

N/A The bearings may be finished per the job specifications. Painting is preferred over hot-dip galvanizing since hot dipping introduces distortion.