Products Catalog

The following formula has proven successful in calculating the thickness of the preformed fabric pad to accept a given rotation.
This formula allows for the internal stresses built up in the pad upon rotation.

PF
Thickness Required = ((W/2) x tan a) / "C"

    W = width of pad in rotation direction
    C = coefficient of friction

CON-SERV Inc recommends an 11 ga. plate be laminated every 2" in pads over 2" thick for strength and stability.

Physical Properties:

  • Durometer: 90 ± 5 (Shore A)
  • Compressive Strength: 10,000 psi max
  • Maximum Design Pressure: 1,500 psi
  • AASHTO Grade


1 - 7 of 7 | Results Per Page | View | Unit of Measure
1 

Item #

Element

Max. Design Pressure (psi)

Durometer (Shore A)

Max. Compressive Strength (psi)

Quantity
03SS 13CS N/A Upper N/A 1500 N/A 90 N/A 18000
06CSB 25PF N/A Lower N/A 1500 N/A 90 N/A 18000
06CSB 50PF N/A Lower N/A 1500 N/A 90 N/A 18000
06CSB 75PF N/A Lower N/A 1500 N/A 90 N/A 18000
06CSB 100PF N/A Lower N/A 1500 N/A 90 N/A 18000
06CSB 125PF N/A Lower N/A 1500 N/A 90 N/A 18000
06CSB 25PF 13CS 50L N/A Alternate Lower N/A 1500 N/A 90 N/A 18000
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1