Con-Serv, Inc. - Quality Slide Bearings For All Industries

Quality Slide Bearings For All Industries

Search Catalog
      GO   
 CON-SLIDE™    Type CSB (2000 PSI to 4000 PSI)
CON-SLIDE™ > Type CSA & CSB Bearings > Type CSB (2000 PSI to 4000 PSI) > View Items  

Type CSB (2000 PSI to 4000 PSI)

Check up to five results to perform an action.


This blend (CSB) was formulated for use against a smooth stainless steel surface.
The CSB system consists of an upper and lower element. The PTFE surface (1 only) is on the lower element. It is nominally 1/16" thick and is control-bonded to a 10-gauge carbon steel (CS) back-up sheet. The upper element is composed of a 20-gauge stainless steel (SS) sheet (RMS<20) resistance welded to a 10-gauge carbon steel (CS) back-up sheet.
The blended CSB material used for this bearing is composed of virgin (unreprocessed) PTFE resin tested per ASTM 04894 or ASTM D4895 and reinforcing agents including milled glass fibers. This structural material has the following representative mechanical and physical properties:
  • Tensile Strength: 3300 psi
  • Elongation: 300%
  • Specific Gravity: 2.11 - 2.21
    Actual values per lot are available upon request which might vary due to processing factors.
    The design engineer shall determine the square inches of bearing area required for the lower element by dividing the load by the allowable pressure from the graph. The upper element is sized for the movement after the lower element is sized for load.
    CON-SERV Inc can supply any practical size cut from stock steel. Size is out to out of back-up plate.
    For ease of installation, CON-SERV recommends a back-up plate 1" larger than the CSA or CSB size to allow a 1/2" recess all around. This recess must be provided for plates requiring a seal weld.
    Certifications on the epoxy, steel and CSB material are available upon request. Welded to a 10-gauge carbon steel (CS) back-up sheet.




  •     border="0" Printable Page  
        Email Email This Page  
        Save To Favorites Save To Favorites
      
    Compare Items
       
      Results 1 - 25 of 120 1 2 3 4 5 

    Item #

    Slide Surface Thickness

    Slide Surface Material

    Back-Up Plate Thickness

    Back-Up Plate Material

    CSB Upper 03SS 13CS 20 GA Stainless Steel 10 GA Carbon Steel
    CSB Upper 03SS 25CS 20 GA Stainless Steel 1/4" PL Carbon Steel
    CSB Upper 03SS 37CS 20 GA Stainless Steel 3/8" PL Carbon Steel
    CSB Upper 03SS 50CS 20 GA Stainless Steel 1/2" PL Carbon Steel
    CSB Upper 03SS 75CS 20 GA Stainless Steel 3/4" PL Carbon Steel
    CSB Upper 03SS 100CS 20 GA Stainless Steel 1" PL Carbon Steel
    CSB Upper 03SS 13SS 20 GA Stainless Steel 10 GA Stainless Steel
    CSB Upper 03SS 25SS 20 GA Stainless Steel 1/4" PL Stainless Steel
    CSB Upper 03SS 37SS 20 GA Stainless Steel 3/8" PL Stainless Steel
    CSB Upper 03SS 50SS 20 GA Stainless Steel 1/2" PL Stainless Steel
    CSB Upper 03SS 75SS 20 GA Stainless Steel 3/4" PL Stainless Steel
    CSB Upper 03SS 100SS 20 GA Stainless Steel 1" PL Stainless Steel
    CSB Upper 03SS 13CT 20 GA Stainless Steel 10 GA Corten Steel
    CSB Upper 03SS 25CT 20 GA Stainless Steel 1/4" PL Corten Steel
    CSB Upper 03SS 37CT 20 GA Stainless Steel 3/8" PL Corten Steel
    CSB Upper 03SS 50CT 20 GA Stainless Steel 1/2" PL Corten Steel
    CSB Upper 03SS 75CT 20 GA Stainless Steel 3/4" PL Corten Steel
    CSB Upper 03SS 100CT 20 GA Stainless Steel 1" PL Corten Steel
    CSB Upper 03SS 13GL 20 GA Stainless Steel 10 GA Galvanized Steel
    CSB Upper 03SS 25GL 20 GA Stainless Steel 1/4" PL Galvanized Steel
    CSB Upper 03SS 37GL 20 GA Stainless Steel 3/8" PL Galvanized Steel
    CSB Upper 03SS 50GL 20 GA Stainless Steel 1/2" PL Galvanized Steel
    CSB Upper 03SS 75GL 20 GA Stainless Steel 3/4" PL Galvanized Steel
    CSB Upper 03SS 100GL 20 GA Stainless Steel 1" PL Galvanized Steel
    CSB Upper 03SS 13AL 20 GA Stainless Steel 10 GA Aluminum
      Results 1 - 25 of 120 1 2 3 4 5 
      

    Con-Serv, Inc.
    Quality • Service • Economy

    1-800-541-1044 / Fax 843-546-1055
    685 Aviation Blvd. • Georgetown, SC 29440