Con-Serv, Inc. - Quality Slide Bearings For All Industries

Quality Slide Bearings For All Industries

Search Catalog
      GO   
 CON-SLIDE™    Type CSB (2000 PSI to 4000 PSI)
CON-SLIDE™ > Type CSA & CSB Bearings > Type CSB (2000 PSI to 4000 PSI) > View Items  

Type CSB (2000 PSI to 4000 PSI)

Check up to five results to perform an action.


This blend (CSB) was formulated for use against a smooth stainless steel surface.
The CSB system consists of an upper and lower element. The PTFE surface (1 only) is on the lower element. It is nominally 1/16" thick and is control-bonded to a 10-gauge carbon steel (CS) back-up sheet. The upper element is composed of a 20-gauge stainless steel (SS) sheet (RMS<20) resistance welded to a 10-gauge carbon steel (CS) back-up sheet.
The blended CSB material used for this bearing is composed of virgin (unreprocessed) PTFE resin tested per ASTM 04894 or ASTM D4895 and reinforcing agents including milled glass fibers. This structural material has the following representative mechanical and physical properties:
  • Tensile Strength: 3300 psi
  • Elongation: 300%
  • Specific Gravity: 2.11 - 2.21
    Actual values per lot are available upon request which might vary due to processing factors.
    The design engineer shall determine the square inches of bearing area required for the lower element by dividing the load by the allowable pressure from the graph. The upper element is sized for the movement after the lower element is sized for load.
    CON-SERV Inc can supply any practical size cut from stock steel. Size is out to out of back-up plate.
    For ease of installation, CON-SERV recommends a back-up plate 1" larger than the CSA or CSB size to allow a 1/2" recess all around. This recess must be provided for plates requiring a seal weld.
    Certifications on the epoxy, steel and CSB material are available upon request. Welded to a 10-gauge carbon steel (CS) back-up sheet.




  •     border="0" Printable Page  
        Email Email This Page  
        Save To Favorites Save To Favorites
      
    Compare Items
       
      Results 1 - 25 of 120 1 2 3 4 5 

    Item #

    Slide Surface Thickness

    Sort by

    Slide Surface Material

    Back-Up Plate Thickness

    Back-Up Plate Material

    CSB Upper 06SS 13CS 1/16" Stainless Steel 10 GA Carbon Steel
    CSB Upper 06SS 25CS 1/16" Stainless Steel 1/4" PL Carbon Steel
    CSB Upper 06SS 37CS 1/16" Stainless Steel 3/8" PL Carbon Steel
    CSB Upper 06SS 50CS 1/16" Stainless Steel 1/2" PL Carbon Steel
    CSB Upper 06SS 75CS 1/16" Stainless Steel 3/4" PL Carbon Steel
    CSB Upper 06SS 100CS 1/16" Stainless Steel 1" PL Carbon Steel
    CSB Upper 06SS 13SS 1/16" Stainless Steel 10 GA Stainless Steel
    CSB Upper 06SS 25SS 1/16" Stainless Steel 1/4" PL Stainless Steel
    CSB Upper 06SS 37SS 1/16" Stainless Steel 3/8" PL Stainless Steel
    CSB Upper 06SS 50SS 1/16" Stainless Steel 1/2" PL Stainless Steel
    CSB Upper 06SS 75SS 1/16" Stainless Steel 3/4" PL Stainless Steel
    CSB Upper 06SS 100SS 1/16" Stainless Steel 1" PL Stainless Steel
    CSB Upper 06SS 13CT 1/16" Stainless Steel 10 GA Corten Steel
    CSB Upper 06SS 25CT 1/16" Stainless Steel 1/4" PL Corten Steel
    CSB Upper 06SS 37CT 1/16" Stainless Steel 3/8" PL Corten Steel
    CSB Upper 06SS 50CT 1/16" Stainless Steel 1/2" PL Corten Steel
    CSB Upper 06SS 75CT 1/16" Stainless Steel 3/4" PL Corten Steel
    CSB Upper 06SS 100CT 1/16" Stainless Steel 1" PL Corten Steel
    CSB Upper 06SS 13GL 1/16" Stainless Steel 10 GA Galvanized Steel
    CSB Upper 06SS 25GL 1/16" Stainless Steel 1/4" PL Galvanized Steel
    CSB Upper 06SS 37GL 1/16" Stainless Steel 3/8" PL Galvanized Steel
    CSB Upper 06SS 50GL 1/16" Stainless Steel 1/2" PL Galvanized Steel
    CSB Upper 06SS 75GL 1/16" Stainless Steel 3/4" PL Galvanized Steel
    CSB Upper 06SS 100GL 1/16" Stainless Steel 1" PL Galvanized Steel
    CSB Upper 06SS 13AL 1/16" Stainless Steel 10 GA Aluminum
      Results 1 - 25 of 120 1 2 3 4 5 
      

    Con-Serv, Inc.
    Quality • Service • Economy

    1-800-541-1044 / Fax 843-546-1055
    685 Aviation Blvd. • Georgetown, SC 29440